0
selected
-
1.
Metal (Mo, W, Ti) Carbide Catalysts: Synthesis and Application as Alternative Catalysts for Dry Reforming of Hydrocarbons-A Review.
Czaplicka, N, Rogala, A, Wysocka, I
International journal of molecular sciences. 2021;(22)
Abstract
Dry reforming of hydrocarbons (DRH) is a pro-environmental method for syngas production. It owes its pro-environmental character to the use of carbon dioxide, which is one of the main greenhouse gases. Currently used nickel catalysts on oxide supports suffer from rapid deactivation due to sintering of active metal particles or the deposition of carbon deposits blocking the flow of gases through the reaction tube. In this view, new alternative catalysts are highly sought after. Transition metal carbides (TMCs) can potentially replace traditional nickel catalysts due to their stability and activity in DR processes. The catalytic activity of carbides results from the synthesis-dependent structural properties of carbides. In this respect, this review presents the most important methods of titanium, molybdenum, and tungsten carbide synthesis and the influence of their properties on activity in catalyzing the reaction of methane with carbon dioxide.
-
2.
NanoZnO-modified titanium implants for enhanced anti-bacterial activity, osteogenesis and corrosion resistance.
Wang, Z, Wang, X, Wang, Y, Zhu, Y, Liu, X, Zhou, Q
Journal of nanobiotechnology. 2021;(1):353
Abstract
Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corrosion resistance, biocompatibility, and mechanical properties, which have gained increasing attention from the viewpoints of fundamental research and practical applications. Also, numerous studies have been carried out to fine-tune the micro/nanostructures of Ti and/or incorporate chemical elements to improve overall implant performance. Zinc oxide nanoparticles (nano-ZnO) are well-known for their good antibacterial properties and low cytotoxicity along with their ability to synergize with a variety of substances, which have received increasingly widespread attention as biomodification materials for implants. In this review, we summarize recent research progress on nano-ZnO modified Ti-implants. Their preparation methods of nano-ZnO modified Ti-implants are introduced, followed by a further presentation of the antibacterial, osteogenic, and anti-corrosion properties of these implants. Finally, challenges and future opportunities for nano-ZnO modified Ti-implants are proposed.
-
3.
Nanoparticles in the Food Industry and Their Impact on Human Gut Microbiome and Diseases.
Ghebretatios, M, Schaly, S, Prakash, S
International journal of molecular sciences. 2021;(4)
Abstract
The use of inorganic nanoparticles (NPs) has expanded into various industries including food manufacturing, agriculture, cosmetics, and construction. This has allowed NPs access to the human gastrointestinal tract, yet little is known about how they may impact human health. As the gut microbiome continues to be increasingly implicated in various diseases of unknown etiology, researchers have begun studying the potentially toxic effects of these NPs on the gut microbiome. Unfortunately, conflicting results have limited researcher's ability to evaluate the true impact of NPs on the gut microbiome in relation to health. This review focuses on the impact of five inorganic NPs (silver, iron oxide, zinc oxide, titanium dioxide, and silicon dioxide) on the gut microbiome and gastrointestinal tract with consideration for various methodological differences within the literature. This is important as NP-induced changes to the gut could lead to various gut-related diseases. These include irritable bowel syndrome (IBS), inflammatory bowel disease (IBD), celiac disease, and colorectal cancer. Research in this area is necessary as the use of NPs in various industries continues to grow along with the number of people suffering from chronic gastrointestinal diseases.
-
4.
Perspectives on resorbable osteosynthesis materials in craniomaxillofacial surgery.
Schumann, P, Lindhorst, D, Wagner, ME, Schramm, A, Gellrich, NC, Rücker, M
Pathobiology : journal of immunopathology, molecular and cellular biology. 2013;(4):211-7
Abstract
Since introduction to the clinics in the 1990s, resorbable osteosynthesis systems have undergone extensive improvements in order to establish their use as a standard treatment, especially in craniomaxillofacial surgery. However, the development of osteosynthesis systems made of poly(α-hydroxy acid) polymers has been hindered by the lack of information on the mechanical properties and biocompatibility of these materials. Moreover, magnesium-based degredable osteosynthesis materials have not yet been integrated into clinical practice owing to biocompatibility problems. Osteosynthesis systems made from nonresorbable titanium alloys have shown excellent biocompatibility, stability and individual fitting to the implant bed, so these materials are currently considered the 'gold standard'. The procedure of plate removal has been subjected to intense scrutiny and controversy. Bioresorbable materials are indicated for special conditions, such as osteosynthesis of the growing skull or orbital floor reconstructions. This paper presents an overview of the currently available and investigated resorbable osteosynthesis materials in comparison with the nonresorbable 'gold standard' titanium. The main problem areas such as sterilization, biocompatibility and stability are highlighted and perspectives for further improvements are provided.
-
5.
[Safety and skin penetration of nanoparticles].
Kimura, E, Todo, H, Sugibayashi, K
Yakugaku zasshi : Journal of the Pharmaceutical Society of Japan. 2012;(3):319-24
-
-
Free full text
-
Abstract
Human beings are exposed or otherwise a subjected to a various chemical compounds. Various nanomaterials are contained in the chemical compounds which are used in many fields. Nanomaterials are also used in cosmetics: titanium dioxide and zinc oxide are examples. Consumers who apply cosmetics to their skin as well as workers at industrial plants may thus be exposed to these nanoparticles. Therefore, it is of great importance to evaluate the safety of these nanoparticles. In this review, we describe the possibility of nanoparticle penetration to skin following exposure, which makes it urgent to evaluate the safety factors. In general, it is necessary to take account of the desquamation rate of the stratum corneum and the permeation pathway and size of nanoparticles when considering such penetration. One layer of the human stratum corneum is peeled off per day. Therefore, a chemical compound of which the skin penetration is lower than the desquamation rate does not permeate through the skin, when the compound infiltrates the stratum corneum. Hence, compounds with a molecular weight of more than 500 Daltons do not permeate through the stratum corneum. However, we must also pay attention to the appendage routes, although the aforementioned layer is the primary permeation route of nanoparticles. The contribution of appendage routes must be taken into consideration.
-
6.
Biological nano-functionalization of titanium-based biomaterial surfaces: a flexible toolbox.
Beutner, R, Michael, J, Schwenzer, B, Scharnweber, D
Journal of the Royal Society, Interface. 2010;(Suppl 1):S93-S105
-
-
Free full text
-
Abstract
Surface functionalization with bioactive molecules (BAMs) on a nanometre scale is a main field in current biomaterial research. The immobilization of a vast number of substances and molecules, ranging from inorganic calcium phosphate phases up to peptides and proteins, has been investigated throughout recent decades. However, in vitro and in vivo results are heterogeneous. This may be at least partially attributed to the limits of the applied immobilization methods. Therefore, this paper highlights, in the first part, advantages and limits of the currently applied methods for the biological nano-functionalization of titanium-based biomaterial surfaces. The second part describes a new immobilization system recently developed in our groups. It uses the nanomechanical fixation of at least partially single-stranded nucleic acids (NAs) into an anodic titanium oxide layer as an immobilization principle and their hybridization ability for the functionalization of the surface with BAMs conjugated to the respective complementary NA strands.