-
1.
Determination of heavy metals and their availability to plants in soil fertilized with different waste substances.
Wierzbowska, J, Kovačik, P, Sienkiewicz, S, Krzebietke, S, Bowszys, T
Environmental monitoring and assessment. 2018;(10):567
-
-
Free full text
-
Abstract
Field trials were conducted in 2004-2015, in Bałcyny, on haplic Luvisol formed out of light boulder clay. The experiment consisted of the following treatments: control (no fertilization), NPK, manure (FYM), dried pelleted sewage sludge (DPSS), composted sewage sludge (CSS), compost made from municipal sewage sludge and straw (SSCS), compost Dano made from unsorted household waste (CUHW), and compost produced from urban green waste (CUGW). Over a period of 12 years, 30 t DM/ha of each manure and composts were used, that is, 10 t DM/ha in each rotation of a crop rotation sequence. Nitrogen fertilization was kept on the same level on all experimental plots. Soil samples from the 0- to 20-cm horizon were collected after the third rotation crop, which was winter wheat harvested in 2015. It has been demonstrated that CUHW raised the soil total Cu content the highest, while the soil content of Zn was elevated the most by DPSS. The content of the remaining heavy metals (Pb, Ni, Cr, Mn, and Fe) increased as well, but to a lesser extent. The soil abundance of phytoavailable forms of copper improved even greater (from 75% when fertilized with CUGW or CSS, up to 124% when treated with CUHW). Soil content of soluble forms of such metals as Zn, Pb, Cr, Mn, and Fe changed less. The content of all analyzed heavy metals in soil (a form approximating the total content) was significantly positively correlated with the content of organic carbon (C-org.). This is the evidence for stronger adsorption of the above elements in soil richer in organic matter. On the other hand, the content of available forms of heavy metals depended more on the soil pH than on its content of C-org.
-
2.
Isotherm equilibria of Mn²⁺ biosorption in drinking water treatment by locally isolated Bacillus species and sewage activated sludge.
Hasan, HA, Abdullah, SR, Kofli, NT, Kamarudin, SK
Journal of environmental management. 2012;:34-43
Abstract
Manganese (Mn(2+)) is one of the inorganic contaminant that causes problem to water treatment and water distribution due to the accumulation on water piping systems. In this study, Bacillus sp. and sewage activated sludge (SAS) were investigated as biosorbents in laboratory-scale experiments. The study showed that Bacillus sp. was a more effective biosorbent than SAS. The experimental data were fitted to the Langmuir (Langmuir-1 & Langmuir-2), Freundlich, Temkin, Dubinin-Radushkevich (D-R) and Redlich-Peterson (R-P) isotherms to obtain the characteristic parameters of each model. Mn(2+) biosorption by Bacillus sp. was found to be significantly better fitted to the Langmuir-1 isotherm than the other isotherms, while the D-R isotherm was the best fit for SAS; i.e., the χ(2) value was smaller than that for the Freundlich, Temkin, and R-P isotherms. According to the evaluation using the Langmuir-1 isotherm, the maximum biosorption capacities of Mn(2+) onto Bacillus sp. and SAS were 43.5 mg Mn(2+)/g biomass and 12.7 mg Mn(2+)/g biomass, respectively. The data fitted using the D-R isotherm showed that the Mn(2+) biosorption processes by both Bacillus sp. and SAS occurred via the chemical ion-exchange mechanism between the functional groups and Mn(2+) ion.
-
3.
Effects of various pretreatment methods on mixed microflora to enhance biohydrogen production from corn stover hydrolysate.
Zhang, K, Ren, N, Guo, C, Wang, A, Cao, G
Journal of environmental sciences (China). 2011;(12):1929-36
Abstract
Five individual pretreatment methods, including three widely-used protocols (heat, acid and base) and two novel attempts (ultrasonic and ultraviolet), were conducted in batch tests to compare their effects on mixed microflora to enhance hydrogen (H2) production from corn stover hydrolysate. Experimental results indicated that heat and base pretreatments significantly increased H2 yield with the values of 5.03 and 4.45 mmol H2/g sugar utilized, respectively, followed by acid pretreatment of 3.21 mmol H2/g sugar utilized. However, compared with the control (2.70 mmol H2/g sugar utilized), ultrasonic and ultraviolet pretreatments caused indistinctive effects on H2 production with the values of 2.92 and 2.87 mmol H2/g sugar utilized, respectively. The changes of soluble metabolites composition caused by pretreatment were in accordance with H2-producing behavior. Concretely, more acetate accumulation and less ethanol production were found in pretreated processes, meaning that more reduced nicotinamide adenine dinucleotide (NADH) might be saved and flowed into H2-producing pathways. PCR-DGGE analysis indicated that the pretreatment led to the enrichment of some species, which appeared in large amounts and even dominated the microbial community. Most of the dominated species were affiliated to Enterobacter spp. and Escherichia spp. As another efficient H2 producer, Clostridium bifermentan was only found in a large quantity after heat pretreatment. This strain might be mainly responsible for better performance of H2 production in this case.
-
4.
Effect of pH and nitrite concentration on nitrite oxidation rate.
Jiménez, E, Giménez, JB, Ruano, MV, Ferrer, J, Serralta, J
Bioresource technology. 2011;(19):8741-7
Abstract
The effect of pH and nitrite concentration on the activity of the nitrite oxidizing bacteria (NOB) in an activated sludge reactor has been determined by means of laboratory batch experiments based on respirometric techniques. The bacterial activity was measured at different pH and at different total nitrite concentrations (TNO₂). The experimental results showed that the nitrite oxidation rate (NOR) depends on the TNO₂ concentration independently of the free nitrous acid (FNA) concentration, so FNA cannot be considered as the real substrate for NOB. NOB were strongly affected by low pH values (no activity was detected at pH 6.5) but no inhibition was observed at high pH values (activity was nearly the same for the pH range 7.5-9.95). A kinetic expression for nitrite oxidation process including switch functions to model the effect of TNO₂ concentration and pH inhibition is proposed. Substrate half saturation constant and pH inhibition constants have been obtained.
-
5.
Comparing alkaline and thermal disintegration characteristics for mechanically dewatered sludge.
Tunçal, T
Environmental technology. 2011;(13-14):1581-8
Abstract
Thermal drying is one of the advanced technologies ultimately providing an alternative method of sludge disposal. In this study, the drying kinetics of mechanically dewatered sludge (MDS) after alkaline and thermal disintegration have been studied. In addition, the effect of total organic carbon (TOC) on specific resistance to filtration and sludge bound water content were also investigated on freshly collected sludge samples. The combined effect of pH and TOC on the thermal sludge drying rate for MDS was modelled using the two-factorial experimental design method. Statistical assessment of the obtained results proposed that sludge drying potential has increased exponentially for both increasing temperature and lime dosage. Execution of curve fitting algorithms also implied that drying profiles for raw and alkaline-disintegrated sludge were well fitted to the Henderson and Pabis model. The activation energy of MDS decreased from 28.716 to 11.390 kJ mol(-1) after disintegration. Consequently, the unit power requirement for thermal drying decreased remarkably from 706 to 281 W g(-1) H2O.
-
6.
A critical review of the bioavailability and impacts of heavy metals in municipal solid waste composts compared to sewage sludge.
Smith, SR
Environment international. 2009;(1):142-56
Abstract
The content, behaviour and significance of heavy metals in composted waste materials is important from two potentially conflicting aspects of environmental legislation in terms of: (a) defining end-of-waste criteria and increasing recycling of composted residuals on land and (b) protecting soil quality by preventing contamination. This review examines the effects of heavy metals in compost and amended soil as a basis for achieving a practical and sustainable balance between these different policy objectives, with particular emphasis on agricultural application. All types of municipal solid waste (MSW) compost contain more heavy metals than the background concentrations present in soil and will increase their contents in amended soil. Total concentrations of heavy metals in source-segregated and greenwaste compost are typically below UK PAS100 limits and mechanical segregated material can also comply with the metal limits in UK PAS100, although this is likely to be more challenging. Zinc and Pb are numerically the elements present in the largest amounts in MSW-compost. Lead is the most limiting element to use of mechanically-segregated compost in domestic gardens, but concentrations are typically below risk-based thresholds that protect human health. Composted residuals derived from MSW and greenwaste have a high affinity for binding heavy metals. There is general consensus in the scientific literature that aerobic composting processes increase the complexation of heavy metals in organic waste residuals, and that metals are strongly bound to the compost matrix and organic matter, limiting their solubility and potential bioavailability in soil. Lead is the most strongly bound element and Ni the weakest, with Zn, Cu and Cd showing intermediate sorption characteristics. The strong metal sorption properties of compost produced from MSW or sewage sludge have important benefits for the remediation of metal contaminated industrial and urban soils. Compost and sewage sludge additions to agricultural and other soils, with background concentrations of heavy metals, raise the soil content and the availability of heavy metals for transfer into crop plants. The availability in soil depends on the nature of the chemical association between a metal with the organic residual and soil matrix, the pH value of the soil, the concentration of the element in the compost and the soil, and the ability of the plant to regulate the uptake of a particular element. There is no evidence of increased metal release into available forms as organic matter degrades in soil once compost applications have ceased. However, there is good experimental evidence demonstrating the reduced bioavailability and crop uptake of metals from composted biosolids compared to other types of sewage sludge. It may therefore be inferred that composting processes overall are likely to contribute to lowering the availability of metals in amended soil compared to other waste biostabilisation techniques. The total metal concentration in compost is important in controlling crop uptake of labile elements, like Zn and Cu, which increases with increasing total content of these elements in compost. Therefore, low metal materials, which include source-segregated and greenwaste composts, are likely to have inherently lower metal availabilities overall, at equivalent metal loading rates to soil, compared to composted residuals with larger metal contents. This is explained because the compost matrix modulates metal availability and materials low in metals have stronger sorption capacity compared to high metal composts. Zinc is the element in sewage sludge-treated agricultural soil identified as the main concern in relation to potential impacts on soil microbial activity and is also the most significant metal in compost with regard to soil fertility and microbial processes. However, with the exception of one study, there is no other tangible evidence demonstrating negative impacts of heavy metals applied to soil in compost on soil microbial processes and only positive effects of compost application on the microbial status and fertility of soil are reported. The negative impacts on soil microorganisms apparent in one long-term field experiment could be explained by the exceptionally high concentrations of Cd and other elements in the applied compost, and of Cd in the compost-amended soil, which are unrepresentative of current practice and compost quality. The metal contents of source-segregated MSW or greenwaste compost are smaller compared to mechanically-sorted MSW-compost and sewage sludge, and low metal materials also have the smallest potential metal availabilities. Composting processes also inherently reduce metal availability compared to other organic waste stabilisation methods. Therefore, risks to the environment, human health, crop quality and yield, and soil fertility, from heavy metals in source-segregated MSW or greenwaste-compost are minimal. Furthermore, composts produced from mechanically-segregated MSW generally contain fewer metals than sewage sludge used as an agricultural soil improver under controlled conditions. Consequently, the metal content of mechanically-segregated MSW-compost does not represent a barrier to end-use of the product. The application of appropriate preprocessing and refinement technologies is recommended to minimise the contamination of mechanically-segregated MSW-compost as far as practicable. In conclusion, the scientific evidence indicates that conservative, but pragmatic limits on heavy metals in compost may be set to encourage recycling of composted residuals and contaminant reduction measures, which at the same time, also protect the soil and environment from potentially negative impacts caused by long-term accumulation of heavy metals in soil.
-
7.
Biological nitrate removal in industrial wastewater treatment: which electron donor we can choose.
Park, JY, Yoo, YJ
Applied microbiology and biotechnology. 2009;(3):415-29
Abstract
Biological denitrification was reviewed regarding its potential application to treating nitrate in industrial wastewater. Although heterotrophic denitrification is an efficient and well-developed process, some carbon content in wastewater is essential to maintain bacterial activity. Because of the high operating cost of heterotrophic denitrification caused by the required addition of a carbon source and potential "carbon breakthrough", the study of autotrophic denitrification has attracted the interest of numerous researchers. Many advances in autotrophic processes have been made in the application of novel concepts and reaction schemes. While the main advantage of autotrophic bacteria rests on the reduction of operating costs by the replacement of an external carbon source with a cheaper electron donor, further decrease in cost requires additional refinement of these processes, including further improvement of reactor structure and optimization of reaction conditions. In the long term, new concepts are required for a compact wastewater treatment process. This review addresses the state of the art of each electron donor candidate for its potential application to the treatment of industrial wastewater containing nitrate.
-
8.
Characterizing the biochemical activity of full-scale enhanced biological phosphorus removal systems: A comparison with metabolic models.
Pijuan, M, Oehmen, A, Baeza, JA, Casas, C, Yuan, Z
Biotechnology and bioengineering. 2008;(1):170-9
Abstract
The metabolism of polyphosphate accumulating organisms (PAOs) has been widely studied through the use of lab-scale enrichments. Various metabolic models have been formulated, based on the results from lab-scale experiments using enriched PAO cultures. A comparison between the anaerobic stoichiometry predicted by metabolic models with that exhibited by full-scale sludge in enhanced biological phosphorus removal (EBPR) wastewater treatment plants (WWTPs) was performed in this study. Batch experiments were carried out with either acetate or propionate as the sole carbon source, using sludges from two different EBPR-WWTPs in Australia that achieved different phosphorus removal performances. The results support the hypothesis that the anaerobic degradation of glycogen is the primary source of reducing equivalents generated by PAOs, however, they also suggested a partial contribution of the tricarboxylic acid (TCA) cycle in some cases. The experimental results obtained when acetate was the carbon source suggest the involvement of the modified succinate-propionate pathway for the generation of poly-beta-hydroxyvalerate (PHV). Overall, the batch test results obtained from full-scale EBPR sludge with both substrates were generally well described by metabolic model predictions for PAOs.
-
9.
Effect of biochemical storage on the denitrification potential of acetate in sequencing batch reactors.
Ciggin, AS, Karahan, O, Orhon, D
Water science and technology : a journal of the International Association on Water Pollution Research. 2007;(10):261-8
Abstract
This study evaluates the effect biochemical storage on the denitrification potential (N(DP)) of acetate. The fate of bacterial storage is evaluated in a sequencing batch reactor system operated in a sequence of anoxic/aerobic phases, fed with acetate as a pulse and continuously under anoxic conditions. N(DP) is defined based on system stoichiometry both for direct growth and storage on acetate. Experimental results do not support conceptual calculations based on system stoichiometry, yielding a higher denitrification potential, N(DP), for continuous feeding than the N(DP) obtained with pulse feeding, due to partial utilisation of the stored PHB within the anoxic phase. The nitrate, acetate and poly-beta-hydroxybutyrate (PHB) profiles obtained in the experimental studies were used in model calibrations for two different feeding patterns. Results of model simulations confirm the experimental results and evaluate the effects imposed on the denitrification potential by sludge age and the anoxic volume ratio.
-
10.
[Field-scale study on performance comparison of bio-augmentation and compost treatment of oily sludge].
Ouyang, W, Liu, H, Yu, YY, Murygina, V, Kalyuzhnyi, S, Xu, ZD
Huan jing ke xue= Huanjing kexue. 2006;(1):160-4
Abstract
In order to explore better treatment process of oily sludge, the field scale experiments were conducted using the sludge containing 12.68% oil. The performance of microbe preparation bio-augmentation (MPB) and compost treatment with manure (CTM) was compared. For the first experiment, 10 L solution containing 150 g microbe preparations and the nutrition were sprayed onto the MPBC cell. The initial oil content of final mixture amounted to 12.12%. The initial oil content of CTM after final mixture approximated to 10.14%. During the experimental period, same quantities of the microbe preparation and nutrient solution were sprayed on MPB at the 15th and 30th day separately. At the same days, the 10 kg manure was added to CTM cell. The degradation effect of MPB was more obvious, oil content dropped to 6.42% with a 47% removal rate of oil. The oil content in control decreased slightly to 10.15% after 56 days, while in CTM it fell down to 6.98% with a total removal rate of 31%. The pH in control fluctuated slightly between 8.28 to 7.93 while that in MPB, from 7.33 to 8.08, which might due to the addition of microbe preparation. The microbial count was analyzed weekly, which represented the adaptation ability of microbe in sludge. Temperature of compost increased rapidly up to 54 degrees C in the presence of manure. The differences of two kinds of methods were identified by GC-MS and the hydrocarbons with less 21 carbons were degraded easily.