-
1.
Surface Stability and Morphology of Calcium Phosphate Tuned by pH Values and Lactic Acid Additives: Theoretical and Experimental Study.
Chen, H, Lv, C, Guo, L, Ma, M, Li, X, Lan, Z, Huo, J, Dong, H, Zhu, X, Zhu, Q, et al
ACS applied materials & interfaces. 2022;(4):4836-4851
Abstract
The ubiquitous mineralization of calcium phosphate (CaP) facilitates biological organisms to produce hierarchically structured minerals. The coordination number and strength of Ca2+ ions with phosphate species, oxygen-containing additives, and solvent molecules played a crucial role in tuning nucleation processes and the surface stability of CaP under the simulated body fluid (SBF) or aqueous solutions upon the addition of oligomeric lactic acid (LACn, n = 1, 8) and changing pH values. As revealed by ab initio molecular dynamics (AIMD), density functional theory (DFT), and molecular dynamics (MD) simulations as well as high-throughput experimentation (HTE), the binding of LAC molecules with Ca2+ ions and phosphate species could stabilize both the pre-nucleation clusters and brushite (DCPD, CaHPO4·2H2O) surface through intermolecular electrostatic and hydrogen bonding interactions. When the concentration of Ca2+ ions ([Ca2+]) is very low, the amount of the formed precipitation decreased with the addition of LAC based on UV-vis spectroscopic analysis due to the reduced chance for the LAC capped Ca2+ ions to coordinate with phosphates and the increased solubility in the acid solution. With the increasing [Ca2+] concentration, the kinetically stable DCPD precipitation was obtained with high Ca2+ coordination number and low surface energy. Morphologies of DCPD precipitation are in plate, needle, or rod, depending on the initial pH values that were tuned by adding NH3·H2O, HCl, or CH3COOH. The prepared samples at pH ≈ 7.4 with different Ca/P ratios exhibited negative zeta potential values, which were correlated with the surface electrostatic potential distributions and potential biological applications.
-
2.
Smart and Functionalized Development of Nucleic Acid-Based Hydrogels: Assembly Strategies, Recent Advances, and Challenges.
Zhang, Y, Zhu, L, Tian, J, Zhu, L, Ma, X, He, X, Huang, K, Ren, F, Xu, W
Advanced science (Weinheim, Baden-Wurttemberg, Germany). 2021;(14):2100216
Abstract
Nucleic acid-based hydrogels that integrate intrinsic biological properties of nucleic acids and mechanical behavior of their advanced assemblies are appealing bioanalysis and biomedical studies for the development of new-generation smart biomaterials. It is inseparable from development and incorporation of novel structural and functional units. This review highlights different functional units of nucleic acids, polymers, and novel nanomaterials in the order of structures, properties, and functions, and their assembly strategies for the fabrication of nucleic acid-based hydrogels. Also, recent advances in the design of multifunctional and stimuli-responsive nucleic acid-based hydrogels in bioanalysis and biomedical science are discussed, focusing on the applications of customized hydrogels for emerging directions, including 3D cell cultivation and 3D bioprinting. Finally, the key challenge and future perspectives are outlined.
-
3.
High-mechanical strength carboxymethyl chitosan-based hydrogel film for antibacterial wound dressing.
Zhang, M, Yang, M, Woo, MW, Li, Y, Han, W, Dang, X
Carbohydrate polymers. 2021;:117590
Abstract
Hydrogels, being highly biocompatible and adaptable with biological tissues, have shown great usability in biomedical applications. In this research, a novel hydrogel film developed from carboxymethyl chitosan (CMCS) loaded with waterborne polyurethane-gelatin hydrolysate was synthesized via aqueous emulsion copolymerization. The synthesized hydrogel film was characterized using mechanical strength tests, FTIR, XPS, SEM, AFM, and various other analysis technologies. The results demonstrated that the hydrogel film exhibited good thermal stability, swelling behavior, as well as controllable biodegradability. Specifically, when the CMCS content was loaded at 6 %, the maximum tensile strength and elongation at the break of the hydrogel film were reached 31.69 MPa and 447.187, respectively. The disk diffusion tests indicated that the hydrogel film presented significant antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). These results indicate that hydrogel films with high mechanical strength and high antibacterial activity could be used for wound dressing applications.
-
4.
Autotolerant ceruloplasmin based biocathodes for implanted biological power sources.
Aleksejeva, O, Sokolov, AV, Marquez, I, Gustafsson, A, Bushnev, S, Eriksson, H, Ljunggren, L, Shleev, S
Bioelectrochemistry (Amsterdam, Netherlands). 2021;:107794
Abstract
High-performance autotolerant bioelectrodes should be ideally suited to design implantable bioelectronic devices. Because of its high redox potential and ability to reduce oxygen directly to water, human ceruloplasmin, HCp, the only blue multicopper oxidase present in human plasma, appears to be the ultimate biocatalyst for oxygen biosensors and also biocathodes in biological power sources. In comparison to fungal and plant blue multicopper oxidases, e.g. Myrothecium verrucaria bilirubin oxidase and Rhus vernicifera laccase, respectively, the inflammatory response to HCp in human blood is significantly reduced. Partial purification of HCp allowed to preserve the native conformation of the enzyme and its biocatalytic activity. Therefore, electrochemical studies were carried out with the partially purified enzyme immobilised on nanostructured graphite electrodes at physiological pH and temperature. Amperometric investigations revealed low reductive current densities, i.e. about 1.65 µA cm-2 in oxygenated electrolyte and in the absence of any mediator, demonstrating nevertheless direct electron transfer based O2 bioelectroreduction by HCp for the first time. The reductive current density obtained in the mediated system was about 12 µA cm-2. Even though the inflammatory response of HCp is diminished in human blood, inadequate bioelectrocatalytic performance hinders its use as a cathodic bioelement in a biofuel cell.
-
5.
Carbon nanohorns as nanocontainers for cisplatin: insight into their interaction with the plasma membranes of normal and breast cancer cells.
Almeida, ER, Dos Santos, HF, Capriles, PVSZ
Physical chemistry chemical physics : PCCP. 2021;(30):16376-16389
Abstract
Cisplatin (cddp)-based chemotherapy is one of the most effective therapeutic alternatives for breast cancer treatment, the most common form of cancer, despite the severe side effects related to the high toxicity and low selectivity of cddp. To circumvent these drawbacks, the encapsulation of cddp into oxidized carbon nanohorns (CNHoxs) has been shown as a promising formulation with biocompatibility and low toxicity. However, there is still a lack of studies regarding the behavior of this cddp@CNHox nanovector on the cell membranes. This study presents an in silico description of the interactions between cddp@CNHox and membrane models of cancer (C_memb) and normal (N_memb) cells referring to a typical human breast. The results revealed the interaction mechanism of the inclusion complex 3cddp@CNHox (three cddp molecules are included in the CNHox cavity) with these biomembranes, which is a multistep process including approach, landing, insertion, and penetration. The 3cddp@CNHox stability was monitored over time, and demonstrated the trapping of cddp molecules inside the CNHox cavity over all simulations. The van der Waals contribution played a primary role (∼74%) for the complex stability. Moreover, the binding free energy calculations indicated that the interaction of the 3cddp@CNHox complex with the C_memb model was slightly more favorable, on average, than with the N_memb model. Analysis of the hydrogen bonds (HBs) formed over simulations of 800 ns explains the selectivity for the C_memb model, since the total number of HBs established between the inclusion complex and the C_memb model was about three times greater than that with the N_memb model. By reinforcing the potentiality of oxidized CNHox as a nanovector of cddp, the results presented in this study may assist and drive new experimental studies with this nanomaterial, focusing on the development of less aggressive formulations for breast cancer treatment.
-
6.
Harnessing the physicochemical properties of DNA as a multifunctional biomaterial for biomedical and other applications.
Chakraborty, A, Ravi, SP, Shamiya, Y, Cui, C, Paul, A
Chemical Society reviews. 2021;(13):7779-7819
Abstract
The biological purpose of DNA is to store, replicate, and convey genetic information in cells. Progress in molecular genetics have led to its widespread applications in gene editing, gene therapy, and forensic science. However, in addition to its role as a genetic material, DNA has also emerged as a nongenetic, generic material for diverse biomedical applications. DNA is essentially a natural biopolymer that can be precisely programed by simple chemical modifications to construct materials with desired mechanical, biological, and structural properties. This review critically deciphers the chemical tools and strategies that are currently being employed to harness the nongenetic functions of DNA. Here, the primary product of interest has been crosslinked, hydrated polymers, or hydrogels. State-of-the-art applications of macroscopic, DNA-based hydrogels in the fields of environment, electrochemistry, biologics delivery, and regenerative therapy have been extensively reviewed. Additionally, the review encompasses the status of DNA as a clinically and commercially viable material and provides insight into future possibilities.
-
7.
Recent advances of thermal properties of sugar palm lignocellulosic fibre reinforced polymer composites.
Asyraf, MRM, Ishak, MR, Norrrahim, MNF, Nurazzi, NM, Shazleen, SS, Ilyas, RA, Rafidah, M, Razman, MR
International journal of biological macromolecules. 2021;(Pt B):1587-1599
Abstract
Biocomposites are materials that are easy to manufacture and environmentally friendly. Sugar palm fibre (SPF) is considered to be an emerging reinforcement candidate that could provide improved mechanical stiffness and strength to the biocomposites. Numerous studies have been recently conducted on sugar palm biocomposites to evaluate their physical, mechanical and thermal properties in various conditions. Sugar palm biocomposites are currently limited to the applications of traditional household products despite their good thermal stability as a prospective substitute candidate for synthetic fibres. Thus, thermal analysis methods such as TGA and DTG are functioned to determine the thermal properties of single fibre sugar palm composites (SPCs) in thermoset and thermoplastic matrix as well as hybrid SPCs. The biocomposites showed a remarkable change considering thermal stability by varying the individual fibre compositions and surface treatments and adding fillers and coupling agents. However, literature that summarises the thermal properties of sugar palm biocomposites is unavailable. Particularly, this comprehensive review paper aims to guide all composite engineers, designers, manufacturers and users on the selection of suitable biopolymers for sugar palm biocomposites for thermal applications, such as heat shields and engine components.
-
8.
Functional biomedical materials derived from proteins in the acquired salivary pellicle.
Zhang, F, Cheng, Z, Ding, C, Li, J
Journal of materials chemistry. B. 2021;(33):6507-6520
Abstract
In the oral environment, the acquired salivary pellicle (ASP) on the tooth surface comprises proteins, glycoproteins, carbohydrates, and lipids. The ASP can specifically and rapidly adsorb on the enamel surface to provide effective lubrication, protection, hydration, and remineralisation, as well as be recognised by various bacteria to form a microbial biofilm (plaque). The involved proteins, particularly various phosphoproteins such as statherins, histatins, and proline-rich proteins, are vital to their specific functions. This review first describes the relationship between the biological functions of these proteins and their structures. Subsequently, recent advances in functional biomedical materials derived from these proteins are reviewed in terms of dental/bone therapeutic materials, antibacterial materials, tissue engineering materials, and coatings for medical devices. Finally, perspectives and challenges regarding the rational design and biomedical applications of ASP-derived materials are discussed.
-
9.
Cell sheet technology: Influence of culture conditions on in vitro-cultivated corneal stromal tissue for regenerative therapies of the ocular surface.
Hasenzahl, M, Müsken, M, Mertsch, S, Schrader, S, Reichl, S
Journal of biomedical materials research. Part B, Applied biomaterials. 2021;(10):1488-1504
Abstract
The in vitro reconstruction of stromal tissue by long-term cultivation of corneal fibroblasts is a smart approach for regenerative therapies of ocular surface diseases. However, systematic investigations evaluating optimized cultivation protocols for the realization of a biomaterial are lacking. This study investigated the influence of supplements to the culture media of human corneal fibroblasts on the formation of a cell sheet consisting of cells and extracellular matrix. Among the supplements studied are vitamin C, fetal bovine serum, L-glutamine, components of collagen such as L-proline, L-4-hydroxyproline and glycine, and TGF-β1, bFGF, IGF-2, PDGF-BB and insulin. After long-term cultivation, the proliferation, collagen and glycosaminoglycan content and light transmission of the cell sheets were examined. Biomechanical properties were investigated by tensile tests and the ultrastructure was characterized by electron microscopy, small-angle X-ray scattering, antibody staining and ELISA. The synthesis of extracellular matrix was significantly increased by cultivation with insulin or TGF-β1, each with vitamin C. The sheets exhibited a high transparency and suitable material properties. The production of a transparent, scaffold-free, potentially autologous, in vitro-generated construct by culturing fibroblasts with extracellular matrix synthesis-stimulating supplements represents a promising approach for a biomaterial that can be used for ocular surface reconstruction in slowly progressing diseases.
-
10.
An insight on egg white: From most common functional food to biomaterial application.
Dong, X, Zhang, YQ
Journal of biomedical materials research. Part B, Applied biomaterials. 2021;(7):1045-1058
Abstract
Natural egg white tis widely used as an ingredient in nutritional foods and for food processing. Due to its characteristic foaming, emulsification, adhesion, and gelation, and its heat setting, biocompatibility, and low cost, research into the application and development of egg white in biomaterials, especially medical biomaterials, have been receiving attention. The composition and characteristics of egg white protein, and the physical mixing and chemically cross-linking of egg white with other materials used to make degradable packaging films, bioceramics, bioplastics, biomimetic films, hydrogels, 3D scaffolds, bone regeneration, biopatterning, biosensors, and so forth, are reviewed in detail in this report. The novel egg white-based biomaterials in various forms and applications could be constructed mostly through physical treatments such as ultrasonic wave, ultraviolet, laser and other radiation or high-temperature calcination. Furthermore, the application and prospects for the use of egg white in biomaterials is also discussed.