1.
Fabrication of Stabilized Fe⁻Mn Binary Oxide Nanoparticles: Effective Adsorption of 17β-Estradiol and Influencing Factors.
Ning, Q, Yin, Z, Liu, Y, Tan, X, Zeng, G, Jiang, L, Liu, S, Tian, S, Liu, N, Wang, X
International journal of environmental research and public health. 2018;(10)
Abstract
Fe⁻Mn binary oxide nanoparticles (FMBON) were reported to be high performance as adsorbent for pollutants removal from aqueous solution. However, there are still limitations in practice application due to the FMBON tend to aggregate into the micro millimeter level. In order to avoid the agglomeration of nanoparticles, this work synthesized the stabilized Fe⁻Mn binary oxide nanoparticles (CMC-FMBON) by using water-soluble carboxymethyl celluloses (CMC) as the stabilizer. The characteristics of CMC-FMBON and FMBON were measured by using Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and Zeta potential. This work systematically investigated the adsorption capacity of CMC-FMBON for 17β-estradiol (E2) and the influences of external environmental factors on E2 removal. The results indicated that CMC-FMBON had much smaller particles, wider dispersion and larger surface area than the FMBON. CMC-FMBON showed better adsorption performance for E2 than FMBON with the maximum adsorption capacity of CMC-FMBON and FMBON were 124.10 and 98.14 mg/g at 298 K, respectively. The experimental data can be well fitted by the model of pseudo-second-order and Langmuir model. The E2 removal by CMC-FMBON was obviously dependent on pH with the maximum adsorption occurring when the pH was acidic. The removal capacity of CMC-FMBON increased when enhancing ionic strength in solution. Background electrolytes promoted slightly E2 adsorption process whereas the presence of humic acid inhibited the E2 removal. π-π interactions, hydrogen bonds, and oxidation might be responsible for E2 removal. This research suggested that the CMC-FMBON has been considered to be a cost-efficient adsorbent for removing E2 from water.
2.
Antimicrobial activity of silver loaded MnO2 nanomaterials with different crystal phases against Escherichia coli.
Wang, L, He, H, Zhang, C, Sun, L, Liu, S, Wang, S
Journal of environmental sciences (China). 2016;:112-120
Abstract
Silver-loaded MnO2 nanomaterials (Ag/MnO2), including Ag/α-MnO2, Ag/β-MnO2, Ag/γ-MnO2 and Ag/δ-MnO2 nanorods, were prepared with hydrothermal and impregnation methods. The bactericidal activities of four types of Ag/MnO2 nanomaterials against Escherichia coli were investigated and an inactivation mechanism involving Ag(+) and reactive oxygen species (ROS) was also proposed. The bactericidal activities of Ag/MnO2 depended on the MnO2 crystal phase. Among these nanomaterials, Ag/β-MnO2 showed the highest bactericidal activity. There was a 6-log decrease in E. coli survival number after treatment with Ag/β-MnO2 for 120min. The results of 5,5-dimethyl-1-pyrroline-N-oxide spin-trapping measurements by electron spin resonance indicate OH and O2‾ formation with addition of Ag/β-MnO2, Ag/γ-MnO2 or Ag/δ-MnO2. The strongest peak of OH appeared for Ag/β-MnO2, while no OH or O2‾ signal was found over Ag/α-MnO2. Through analysis of electron spin resonance (ESR) and Ag(+) elution results, it could be deduced that the toxicity of Ag(+) eluted from Ag/MnO2 nanomaterials and ROS played the main roles during the bactericidal process. Silver showed the highest dispersion on the surface of β-MnO2, which promoted ROS formation and the increase of bactericidal activity. Experimental results also indicated that Ag/MnO2 induced the production of intracellular ROS and disruption of the cell wall and cell membrane.