0
selected
-
1.
Stimulation of methanogenesis in anaerobic digesters treating leachate from a municipal solid waste incineration plant with carbon cloth.
Lei, Y, Sun, D, Dang, Y, Chen, H, Zhao, Z, Zhang, Y, Holmes, DE
Bioresource technology. 2016;:270-276
Abstract
Bio-methanogenic digestion of incineration leachate is hindered by high OLRs, which can lead to build-up of VFAs, drops in pH and ultimately in reactor souring. It was hypothesized that incorporation of carbon cloth into reactors treating leachate would promote DIET and enhance reactor performance. To examine this possibility, carbon cloth was added to laboratory-scale UASB reactors that were fed incineration leachate. As expected, the carbon-cloth amended reactor could operate stably with a 34.2% higher OLR than the control (49.4 vs 36.8kgCOD/(m3d)). Microbial community analysis showed that bacteria capable of extracellular electron transfer and methanogens known to participate in DIET were enriched on the carbon cloth surface, and conductivity of sludge from the carbon cloth amended reactor was almost twofold higher than sludge from the control (9.77 vs 5.47μS/cm), suggesting that microorganisms in the experimental reactor may have been expressing electrically conductive filaments.
-
2.
Effect of dissolved oxygen on elemental sulfur generation in sulfide and nitrate removal process: characterization, pathway, and microbial community analysis.
Wang, X, Zhang, Y, Zhang, T, Zhou, J
Applied microbiology and biotechnology. 2016;(6):2895-905
Abstract
Microaerobic bioreactor treatment for enriched sulfide and nitrate has been demonstrated as an effective strategy to improve the efficiencies of elemental sulfur (S(0)) generation, sulfide oxidation, and nitrate reduction. However, there is little detailed information for the effect and mechanism of dissolved oxygen (DO) on the variations of microbial community in sulfur generation, sulfide oxidation, and nitrate reduction systems. Polymerase chain reaction denaturing gradient gel electrophoresis (PCR-DGGE) was employed to evaluate the variations of microbial community structures in a sulfide oxidation and nitrate reduction reactor under different DO conditions (DO 0-0.7 mg · L(-1)). Experimental results revealed that the activity of sulfide-oxidizing bacteria (SOB) and nitrate-reducing bacteria (NRB) could be greatly stimulated in 0.1-0.3 mg-DO · L(-1). However, when the DO concentration was further elevated to more than 0.5 mg · L(-1), the abundance of NRB was markedly decreased, while the heterotrophic microorganisms, especially carbon degradation species, were enriched. The reaction pathways for sulfide and nitrate removal under microaerobic conditions were also deduced by combining batch experiments with functional species analysis. It was likely that the oxidation of sulfide to sulfur could be performed by both aerobic heterotrophic SOB and sulfur-based autotrophic denitrification bacteria with oxygen and nitrate as terminal electron acceptor, respectively. The nitrate could be reduced to nitrite by both autotrophic and heterotrophic denitrification, and then the generated nitrite could be completely converted to nitrogen gas via heterotrophic denitrification. This study provides new insights into the impacts of microaerobic conditions on the microbial community functional structures of sulfide-oxidizing, nitrate-reducing, and sulfur-producing bioreactors, which revealing the potential linkage between functional microbial communities and reactor performance.
-
3.
The effect of continuous Zn (II) exposure on the organic degradation capability and soluble microbial products (SMP) of activated sludge.
Han, JC, Liu, Y, Liu, X, Zhang, Y, Yan, YW, Dai, RH, Zha, XS, Wang, CS
Journal of hazardous materials. 2013;:489-94
Abstract
This study describes the change of organic degradation capability and soluble microbial products (SMP) generated in activated sludge under continuous exposure to Zn (II) in a sequencing batch reactor (SBR). In 338 days of operation, the added Zn (II) concentrations were gradually increased from 50 to 100, 200, 400 to 600 and 800 mg/L. Results showed that after adaptation, the activated sludge could endure 400mg/L Zn (II) without showing evident reduction in organic degradation ability (92±1% of chemical oxygen demand (COD) removal in stable state). However, when 600 and 800 mg/L Zn (II) were applied, the effluent water quality significantly deteriorated. Meanwhile, under increasing Zn (II) concentrations, the SMP content in the activated sludge, together with its main biochemical constituents, first increased slightly below 400mg/L of Zn (II), then rose sharply under 600 and 800 mg/L Zn (II). Furthermore, a close correlation was found between SMP content and effluent soluble COD in both the Experimental Reactor and Control Reactor. In addition, the Zn (II) concentrations in the effluent and SMP extraction liquid were further analyzed and discussed to reveal the role that SMP constituents played in defense and resistance to the toxicity of Zn (II).
-
4.
Medium optimization for ethanol production with Clostridium autoethanogenum with carbon monoxide as sole carbon source.
Guo, Y, Xu, J, Zhang, Y, Xu, H, Yuan, Z, Li, D
Bioresource technology. 2010;(22):8784-9
Abstract
Plackett-Burman and central composite designs were applied to optimize the medium for ethanol production by Clostridium autoethanogenum with CO as sole carbon source, and a medium containing (g/L): NaCl 1.0, KH(2)PO(4) 0.1, CaCl(2) 0.02, yeast extract 0.15, MgSO(4) 0.116, NH(4)Cl 1.694 and pH 4.74 was found optimal. The optimum ethanol yields predicted by response surface methodology (RSM) and an artificial neural network-genetic algorithm (ANN-GA) were 247.48 and 261.48mg/L, respectively. These values are similar to those obtained experimentally under the optimal conditions suggested by the statistical methods (254.26 and 259.64mg/L). The fitness of the ANN-GA model was higher than that of the RSM model. The yields obtained substantially exceed those previously reported (60-70mg/L) with this organism.
-
5.
[Effect of nitrite accumulation on enhanced biological phosphorus removal (EBPR) in A2O process treating domestic wastewater].
Zeng, W, Li, L, Yang, YY, Zhang, Y, Peng, YZ
Huan jing ke xue= Huanjing kexue. 2010;(9):2105-12
Abstract
At normal temperature, short-cut nitrification and denitrification was achieved in a lab-scale A2O process treating low C/N ratio domestic wastewater by controlling DO concentration of 0.3-0.5 mg/L and increasing the internal reflux ratio to decrease the actual aerobic HRT. However, the phosphorus removal in A2O process was deteriorated with the increasing of the nitrite concentration in the effluent. The factors causing phosphorus removal deterioration, such as the influent COD concentrations, temperature, pH and free nitrous acid (FNA) were systematically analyzed. Experimental results showed that the nitrite accumulation resulting from short-cut nitrification affected anaerobic P release and aerobic P uptake. Especially, the higher FNA concentration (HNO2-N 0.002-0.003 mg/L) in the aerobic zone significantly inhibited the aerobic P uptake, which was the major reason causing P removal deterioration. Through adding the carbon sources in influent to enhance anaerobic P release and denitrification, the nitrite and FNA concentrations in the aerobic zone were decreased, and the P removal was recovered. More than 96% of PO4(3-) -P could be removed in A2O process.